Information nozzle and holder assy.
BOSCH
9 430 610 435
9430610435
ZEXEL
105148-1401
1051481401
MITSUBISHI
ME201844
me201844
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Pmtihxu 1 PCS Fuel Injector ME731687 9430610435 Fits For Mitsubishi Engine 4M40 4M40T 2.8L V26 V46 PD8W PE8W PF8W L200 2.8TD
Pmtihxu Item Type: ME731687 Fuel Injector || Part number: ME731687 9430610435 || Fits For Mitsubishi Engine 4M40 4M40T 2.8L V26 V46 PD8W PE8W PF8W L200 2.8TD || Condition: New || Note: 1.We Only Ship To Confirmed Order Addresses. Your Order Address Must Match Your Shipping Address. 2.in Order To Avoid Unnecessary Return,please Check The Product Picture And Part Number Carefully To Make Sure It Is The Product You Want.
Pmtihxu Item Type: ME731687 Fuel Injector || Part number: ME731687 9430610435 || Fits For Mitsubishi Engine 4M40 4M40T 2.8L V26 V46 PD8W PE8W PF8W L200 2.8TD || Condition: New || Note: 1.We Only Ship To Confirmed Order Addresses. Your Order Address Must Match Your Shipping Address. 2.in Order To Avoid Unnecessary Return,please Check The Product Picture And Part Number Carefully To Make Sure It Is The Product You Want.
Seapple 1pcs Fuel Injector ME731687 ME201844 Compatible with Mitsubishi Engine 4M40 4M40T 2.8L V26 V46 PD8W PE8W PF8W L200 2.8TD
Seapple Part Name: Fuel Injector || Part Numbers: ME731687 ME201844 || Engine Model: 2.8L || Compatible with Mitsubishi Engine 4M40 4M40T 2.8L V26 V46 PD8W PE8W PF8W L200 2.8TD || If there are multiple part numbers on the link that need to be confirmed, please make a note in advance or write to our customer service to inform you of the required part number or engine model to avoid unnecessary returns. Thank you.
Seapple Part Name: Fuel Injector || Part Numbers: ME731687 ME201844 || Engine Model: 2.8L || Compatible with Mitsubishi Engine 4M40 4M40T 2.8L V26 V46 PD8W PE8W PF8W L200 2.8TD || If there are multiple part numbers on the link that need to be confirmed, please make a note in advance or write to our customer service to inform you of the required part number or engine model to avoid unnecessary returns. Thank you.
You can express buy:
USD 21.9
27-10-2022
27-10-2022
Suitable for Mitsubishi V26 V46 4D56 4M40 injector ME200204 ME201844
USD 66
27-10-2022
27-10-2022
4PCS Fuel Injectos For Delica Spacegear Pajero 4M40 4M40T 2.8L ME201844 9430610435
Images:
USD 36.48
[10-Nov-2022]
USD 91.3
[10-Nov-2022]
Include in #2:
104701-3000
as NOZZLE AND HOLDER ASSY
Cross reference number
Zexel num
Bosch num
Firm num
Name
105148-1401
ME201844 MITSUBISHI
NOZZLE AND HOLDER ASSY.
4M40T1 K 53KJ NOZZLE & HOLDER ASSY N&NH KCA-P N&NH
4M40T1 K 53KJ NOZZLE & HOLDER ASSY N&NH KCA-P N&NH
Information:
Start By:a. remove cylinder head assemblyb. remove front housing groupc. remove flywheel housingd. remove crankshaft rear seal assemblye. remove piston and connecting rod assemblies 1. Remove bolts (1). Remove main bearing caps (2). Remove thrust bearings (3) from the center main. Main bearing caps are identified by numbers one through seven. Unmarked caps should be marked by stamping the appropriate number toward the right side on the bottom prior to the removal. 2. Install a suitable size bolt in each end of the crankshaft as shown. Fasten two lifting straps (4) to the bolts in the crankshaft and to a hoist as shown. Carefully, remove the crankshaft. The appropriate weight of the crankshaft is 129 kg (285 lb).3. Remove the upper portions of the main bearings. The following steps are for the installation of the crankshaft.
Be sure the main bearing tabs engage with the grooves in the block and cap.
4. Position the upper portion of the main bearings in the cylinder block. Lower the main bearing portion in caps (2). Be sure everything is clean and only the bearing face is lubricated with clean engine oil.5. Fasten a hoist to the crankshaft, and position it in the cylinder block. 6. Install thrust bearings (3).7. Install main bearing caps (2) with the part numbers toward the right hand side of the cylinder block. Take care to ensure the caps are numbered one through seven from the front of the engine. Put clean engine oil or molylube on the bolt threads and the washer face; then install bolts (1). Tighten the bolts on the side where the main bearing tabs are located to a torque of 95 5 N m (70 4 lb ft). Tighten the bolts on the opposite side to a torque of 95 5 N m (70 4 lb ft).8. Put a mark on each bolt head and the bearing caps. Turn the bolts that are opposite the main bearing tabs an additional 90° 5° turn. Then turn the bolts on the side where the main bearing tabs are located an additional 90° 5° turn.
Typical Example9. Use tooling (A) to measure crankshaft end play. The crankshaft end play must be 0.10 to 0.50 mm (.004 to .020 in).End By:a. install piston and connecting rod assembliesb. install crankshaft rear seal assemblyc. install flywheel housingd. install front housing groupe. install cylinder head assembly
Be sure the main bearing tabs engage with the grooves in the block and cap.
4. Position the upper portion of the main bearings in the cylinder block. Lower the main bearing portion in caps (2). Be sure everything is clean and only the bearing face is lubricated with clean engine oil.5. Fasten a hoist to the crankshaft, and position it in the cylinder block. 6. Install thrust bearings (3).7. Install main bearing caps (2) with the part numbers toward the right hand side of the cylinder block. Take care to ensure the caps are numbered one through seven from the front of the engine. Put clean engine oil or molylube on the bolt threads and the washer face; then install bolts (1). Tighten the bolts on the side where the main bearing tabs are located to a torque of 95 5 N m (70 4 lb ft). Tighten the bolts on the opposite side to a torque of 95 5 N m (70 4 lb ft).8. Put a mark on each bolt head and the bearing caps. Turn the bolts that are opposite the main bearing tabs an additional 90° 5° turn. Then turn the bolts on the side where the main bearing tabs are located an additional 90° 5° turn.
Typical Example9. Use tooling (A) to measure crankshaft end play. The crankshaft end play must be 0.10 to 0.50 mm (.004 to .020 in).End By:a. install piston and connecting rod assembliesb. install crankshaft rear seal assemblyc. install flywheel housingd. install front housing groupe. install cylinder head assembly