Buy 105148-1430 ZEXEL 9 430 610 436 BOSCH NOZZLE AND HOLDER ASSY. 9430610436 1051481430 8971296140


 

Information nozzle and holder assy.

BOSCH 9 430 610 436 9430610436
ZEXEL 105148-1430 1051481430
ISUZU 8971296140 8971296140
105148-1430 NOZZLE AND HOLDER ASSY.
Rating:
28
Buy NOZZLE AND HOLDER ASSY. 105148-1430 zexel genuine, new aftermarket engine parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below
$340.60

18 Nov 2024

CN: Starhycfa
6Pcs Fuel Injection 8971296140 Compatible with Isuzu Engine UM4LC1 4LE1 4LE2
Starhycfa Product name:Fuel Injection || Part Number:8971296140 || APPlication:Compatible with Isuzu Engine UM4LC1 4LE1 4LE2 || 1.Please carefully compare the pictures or OE numbers to match your original parts before purchasing the product. || 2.Please make sure that the model number, part number and photo is the same as yours before order. To Avoid placing wrong orders and wasting your precious time.
$235.35

18 Nov 2024

CN: Starhycfa
4Pcs Fuel Injection 8971296140 Compatible with Isuzu Engine UM4LC1 4LE1 4LE2
Starhycfa Product name:Fuel Injection || Part Number:8971296140 || APPlication:Compatible with Isuzu Engine UM4LC1 4LE1 4LE2 || 1.Please carefully compare the pictures or OE numbers to match your original parts before purchasing the product. || 2.Please make sure that the model number, part number and photo is the same as yours before order. To Avoid placing wrong orders and wasting your precious time.

Include in #2:

104134-3001 as NOZZLE AND HOLDER ASSY

Cross reference number

Zexel num
Bosch num
Firm num
Name
105148-1430 
9 430 610 436 
0230 
8971296140  ISUZU
NOZZLE AND HOLDER ASSY.
UM4LC1 K 53KJ NOZZLE & HOLDER ASSY N&NH KCA-P N&NH




Information:


Right Side (6 Cylinder Shown)(1) Depth that cup plugs are installed (measured from block face to top edge of plug) ... 1.25 0.25 mm (.049 .010 in)(2) Distance all sleeves extend from top face ... 14 2 mm (.55 .08 in)(3) Distance two large dowels extend from rear face ... 12.0 0.5 mm (.47 .02 in)(4) Distance two small dowels extend from rear face ... 8.0 0.5 mm (.31 .02 in)(5) Distance all dowels extend from front face ... 8.0 0.5 mm (.31 .02 in)
View A-A (Rear Face)(6) Bores in block for all camshaft bearings except front bearing ... 69.000 0.038 mm (2.7165 .0015 in)(7) Locate bearing oil hole for all camshaft bearings (except front bearing) at top of bore.
Front Face(8) Bore in block for front camshaft bearing ... 70.000 0.025 mm (2.7559 .0010 in)(9) Front camshaft bearing joint location.(10) Front camshaft bearing oil hole. Install front camshaft bearing with bearing oil hole (10) aligned with oil hole in block and bearing joint (9) positioned as shown.(11) Width of main bearing cap ... 159.995 0.020 mm (6.2990 .0008 in) Width of cylinder block for main bearing cap ... 160.000 0.018 mm (6.2992 .0007 in)(12) Bore in block for main bearings ... 95.000 0.013 mm (3.7402 .0005 in)(13) Main bearing cap bolts. Install as follows: Install bearing caps with sequence number to the right, 1 through 5 (for 4 cylinder) or 1 through 7 (for 6 cylinder), front to rear.a. Before assembly, put 2P2506 Thread Lubricant on the bolt threads and washer face.b. Tighten both bolts of each bearing cap to a torque of ... 54 7 N m (40 5 lb ft)c. Then tighten bolts an additional ... 90 5 degrees (1/4 turn)(14) Location of bearing cap sequence number.(15) Dimension from centerline of crankshaft bore to pan rail ... 110.00 mm (4.331 in)(16) Dimension from centerline of crankshaft bore to top of block ... 322.00 .017 mm (12.677 .0007 in)(17) Cylinder bore size ... 105.025 .025 mm (4.1348 .0010 in) Bore size must be checked with a 4C4377 Cylinder Head Stress Plate and gasket installed. Refer to Installation Of 7C6208 Cylinder Sleeve, Special Instruction Form No. SEHS9047. (18) Piston cooling jet. Check piston cooling jets by inserting a 1.3 mm (.05 in) diameter drill rod into jet. Rod must pass through a 5.0 mm (.20 in) diameter circle in location (A) and a 13 mm (.51 in) diameter circle in location (B). Dimension (C) is 25.9 mm (1.02 in). Dimension (D) is 33.4 mm (1.31 in). Dimension (E) is 26.95 mm (1.061 in). Dimension (F) is 9.8 mm (.39 in). Dimension (G) is 50 mm (2.0 in). Distance four sleeves (19) extend from side face ... 5.0 0.5 mm (.20 .02 in)

Have questions with 105148-1430?





Group cross 105148-1430 ZEXEL

9 430 610 434 
78-018044 
 
NOZZLE AND HOLDER ASSY.

Mitsubishi 

9 430 610 435 
018144 
ME201844 
NOZZLE AND HOLDER ASSY.
4M40T1

Hyundai 

9 430 613 152 
 
NOZZLE AND HOLDER ASSY.
4D56
9 430 613 153 
 
NOZZLE AND HOLDER ASSY.
4D56

Nissan 

9 430 610 170 
0050T 
166000F020 
NOZZLE AND HOLDER ASSY.
TD27T
9 430 610 170 
0050T 
166000F02A 
NOZZLE AND HOLDER ASSY.
TD27T

Isuzu 

105148-1430  
9 430 610 436 
0230 
8971296140 
NOZZLE AND HOLDER ASSY.
UM4LC1
9 430 610 437 
0240 
 
NOZZLE AND HOLDER ASSY.
4JG2

Isuzu 

9 430 613 693 
0240 
8971429580 
NOZZLE AND HOLDER ASSY.
4JG2
9 430 612 731 
 
NOZZLE AND HOLDER ASSY.
4JG2

Isuzu 

9 430 613 694 
0240 
8971406240 
NOZZLE AND HOLDER ASSY.
4JG2
9 430 610 438 
0250 
 
NOZZLE AND HOLDER ASSY.
4JG2

Isuzu 

9 430 613 690 
0250 
8971429590 
NOZZLE AND HOLDER ASSY.
4JG2
9 430 613 158 
 
NOZZLE AND HOLDER ASSY.
4JG2

Isuzu 

9 430 613 691 
0250 
8971406250 
NOZZLE AND HOLDER ASSY.
4JG2

Mazda 

9 430 610 158 
0111 
WL0213H50 
NOZZLE AND HOLDER ASSY.
WLT
9 430 610 159 
0111 
WL0313H50 
NOZZLE AND HOLDER ASSY.
WLT
Back to top